Description
Pro Convert HDMI Plus Specifications
Supported Web Browser (tested)
- Microsoft Internet Explorer 11
- Microsoft Edge
- Mozilla Firefox version 61 and above
- Google Chrome version 49 and above
- Apple Safari 11.1 and above
- Opera 55.0.2994.44 and above
Supported Software (tested)
- vMix
- OBS
- XSplit
- VidBlasterX
- Wirecast
- streamstar SW
- mimoLive
- Any other NewTek NDI-enabled encoding or streaming software
Storage Interface
- SD Card (functions to be developed)
Network Interfaces
- 10/100/1000Mbps Ethernet
- IEEE 802.3af PoE
USB Interface
- USB2.0 Type B
- 5V/2.1A power supply
- USB RNDIS/ECM
Input feature
- Support for input video resolutions up to 4096×2160
HDMI Specific Features
- 297MHz HDMI receiver
- Adaptive HDMI equalizer
- Support for customized EDID
- Support for extraction of AVI/Audio InfoFrames
- Full colorimetry support
- Support for up to 4096×2160 4:4:4/4:2:2 30fps or 4096×2160 4:2:0 60fps input signals
- Support for 8 channel IEC60958 audio streams
- Support for extraction of audio formation information & channel status data
- Support for extraction of video timing information
- Support for extraction of 3D format information
- Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.
NDI® Output Format
- Support for 4:2:2 8-bit output
- Support for up to 2048×2160 120fps
- Support for NDI 3.x
Video Processing Features
- Video processing pipelines with 160 Mpixels/s
- Video brightness, contrast, saturation, hue adjustment
- Video de-interlacing
- Top field only
- Bottom field only
- Video aspect ratio conversion
- Auto or manual selection of output aspect ratio
- Video color format conversion
- Auto or manual selection of input color format & quantization range
- Auto or manual selection of output color format, quantization range & saturation range
- Support for RGB, YUV BT.601, YUV BT.709, YUV BT.2020 input color formats
- Support for YUV BT.601, YUV BT.709, YUV BT.2020 output color formats
- Support for Limited or Full quantization range
- Support for Limited, Full & ‘Extended gamut’ saturation range
- Video frame rate conversion
- Video mirror flip
NDI® Source Name
- Support for setting the device name shown in the system using Web UI. By default, the device name is ‘Pro Convert’.
- Support for setting the source name shown in the system using Web UI. By default, the source name is ‘board-index + serial number’.
- Support for setting board-index, from 0 to F, through on-board rotary switch
Firmware Upgrade
- Support for manual update using Web UI
LED Indicator
- Status LEDs indicate:
- the state of power supply: on/off
- Tally: preview/program
- the state of input signal: locked/unlocked
- the state of loopthrough signal: loopthrough connected and signal detected/undetected
Form Factor
- 117.5mm (L) x 66.7mm (W) x 23.4mm (H)
Accessories
- USB 2.0 A to B Cable
- 5V/2.1A power adaptor
- Mini-DIN–8 (PTZ + TALLY) to RS232 (PTZ) + Mini-DIN–8 (TALLY)
- L-bracket
- LED matrix panel (optional)
Power Consumption
- 5V max current: ~1.5A
- Max power consumption: ~8W
Working Environment
- Operating temperature: 0 to 45 deg C
- Storage temperature: –20 to 70 deg C
- Relative Humidity: 5% to 90% non-condensing